Backflow Testing & Sprinkler Blowout Service Boise, ID
If you have a home, rental, or commercial property in the Boise area, two seasonal services protect you from the biggest surprise problems: backflow testing and sprinkler system blowout service in Boise, ID. At M Property Services, we can handle both services in one visit when it’s practical.
What Is Backflow?
Backflow is when water (and possible contaminants) flows in the wrong direction, back into a drinking water system. Testing matters because cross connections or connections between potable and non-potable systems can release contaminants into drinking water if backflow occurs, and that backflow can be a serious public health hazard.
How often is backflow testing required?
Annual inspections and testing of installed backflow prevention assemblies by a licensed tester are often required as per rules and regulations. Many local water providers require proof of annual testing and can take action for noncompliance, including discontinuing service in certain situations.
What Does a Backflow Tester Do?
A certified backflow tester performs a structured field test to confirm the assembly is working correctly. In simple terms, we check that internal valves and components are holding pressure properly and preventing reverse flow.
If an assembly fails, the next step is usually repair or replacement. Idaho rules also describe timelines and enforcement expectations for defective assemblies in the context of program requirements.
Our Services in Boise, Idaho
We are a licensed and insured company that follows state regulations and industry standards, so you can feel confident your system is handled correctly. We provide full-service sprinkler start-up, sprinkler blowout, and backflow assembly testing, and we can also complete on-site assessments and repair estimates for sprinkler heads, valves, and backflow systems when something is not working the way it should.
Core Services We Provide
Sprinkler Start-Up (Spring Activation)
We turn your system back on for the season, check zones, and help confirm everything runs properly.
Backflow Assembly Testing
We perform backflow testing in Boise to help protect water quality and meet local testing requirements.
Sprinkler Blowout in Boise (Winterization)
We remove water from the irrigation system to help prevent freeze damage during colder months.
On-Site Assessments and Repair Estimates
We can evaluate issues on-site and provide repair estimates for sprinkler heads, valves, and backflow systems.
Cost of Backflow Testing in Boise, Idaho
We believe in clear, straightforward pricing with no surprises. Our Boise, ID backflow testing services are priced at $60, which includes professional testing performed by a licensed and insured technician in accordance with state and local requirements.
This service helps ensure your backflow assembly is working properly, protects the local water supply, and keeps your property in compliance with annual testing requirements. If you manage multiple properties or have more than one backflow assembly, we can provide clear pricing after a quick review of your setup.
What Is A Sprinkler System Blowout Service?
A sprinkler blowout service (also called sprinkler winterization) uses compressed air to push water out of irrigation lines, valves, and sprinkler heads so water does not freeze inside the system.
Why Sprinkler Blowouts Matter in Boise Winters
When water freezes, it expands. If water is trapped in irrigation lines or components, that expansion can crack pipes, damage valves, and break sprinkler heads. Draining is important so water does not freeze, expand, and break pipes.
When to Schedule a Sprinkler Blowout in Boise, Idaho
We recommend scheduling your sprinkler blowout in Boise between September and November, before the first hard freeze. Earlier is better because the schedule fills quickly.
What Happens During Our Sprinkler Blowout Service
Water supply shut-off: We turn off the irrigation water supply to prevent any new water from entering the system.
Controller set for winter: We adjust or power down the sprinkler controller so it does not activate during winter.
Professional air connection: We connect commercial-grade equipment designed for irrigation systems, not small residential compressors.
Zone-by-zone blowout: Each sprinkler zone is cleared individually to safely remove water from pipes, valves, and sprinkler heads.
Proper pressure control: Air pressure and airflow are carefully managed to avoid damage to pipes and components.
Backflow protection: We winterize the backflow preventer correctly to reduce freeze risk.
Final system check: We confirm all zones are cleared, and the system is left in a safe winter-ready state.
Explore Our Yearly Package (Best Value)
Ask about our yearly package that includes:
Sprinkler Start-Up
Backflow Test
Blowout
It’s available at $150 (for up to 6 zones)
Save Time By Choosing One Team for Both Services
Many Boise-area properties need both backflow testing and seasonal winterization. Instead of scheduling separate contractors, M Property Services handles both in the same season and keeps your records and maintenance simpler. Call us at (208) 861-2751 today to schedule a service.
QUICK ANSWERS
Frequently Asked Questions.
-
Testing must be done by a properly licensed backflow tester under Idaho requirements for annual inspection and testing of assemblies.
-
If it fails, it typically needs repair, replacement, or isolation, and local programs may require action to maintain compliance, sometimes with enforcement consequences.
-
A sprinkler blowout in Boise removes water from irrigation lines using compressed air to help prevent pipes, valves, and sprinkler heads from freezing and breaking during winter.
-
A sprinkler system blowout service includes shutting off the water supply, clearing each zone with controlled air pressure, and winterizing key components so the system is safe for cold weather.
-
Residential systems may take 30 to 60 minutes, depending on zones and system complexity.
-
DIY blowouts can be risky because incorrect pressure or inadequate air volume can damage components, and manufacturers recommend caution and professional support due to safety risks.
-
Backflow testing and prevention services include inspecting, testing, and identifying issues with backflow assemblies, as well as providing repair estimates if a device fails testing.
Get Started Today.
Don’t let property maintenance stress you out. We are ready to tackle your electrical, HVAC, and handyman needs with integrity and expertise. Whether you need a simple fix or a major repair, M Property Services is your reliable local partner.
Call or Text Jim
(208) 861-2751
Email Us
jim@mpsid.com
Business Location
Serving Boise, ID & Surrounding
Areas
Service Request Form